AEO-RC

Specification of the 2.5g servo: Operating Voltage:   DC3–6V Stall Torque:   ≥ 0.2kg.cm      4.8V                     ≥ 0.35kg.cm      6 V Operating Speed:  0.1sec/60°at no load Weight:   2.5g

X-GYRO 1000 is a two axis head tracking system, based on G sensor technology, designed for tracking complicated three-dimensional motion like head movement and so on, it can also be used on the areas of controlling drones and robots, transferring three-dimensional motion signals from hands, head of human to corresponding movement system on RC model, drone or robot. The basic version of X-GYRO 1000 is specially designed for RC models with FPV(First Personal Version), it can be used perfectly with main stream transmitters or to be co-operated with wireless high frequency modular independently. It can transfer the movement signals to transmitter, and the transmitter can send out signals of head movement or position of head( on two axis), so that the real synchronization can be realized when screen on the goggles displayed video pictures,   users can look around as if he were inside the RC model . Since it is compatible with transmitters in todays market, it is easy and straight forward to use. Its best advantage is that there is no need to have any fixed reference object to check and measure the inflection position of RC model, and no drift at all when it is in a stationary state compared with other products that need to make use of very complicated reference facilities or manual controlled transmitters. Specifications: Power: 8V to 12V DC power supply. Some transmitters, especially those FUTABA ones, can supply power directly by trainer connector. (ex. T9Z, FF9C). Some transmitters cannot supply power to X-GYRO, for example 14MZ and 12FG. The simplest solution is to use an extra battery for those RC transmitters. The connector is already included in package. Size: 25mmX35mm Weight:20g Range for measuring: +-90 degree/second rotational speed movement. Default Setting: Channels: X axis- channel 7 Y axis-channel 8 Detective range G45 degree Choice for transmitters; FUTABA:   (FF-7, FF-8, FF-9, T9Z, T12MZ, T14MZ) Graupner:   (MC20, MC24, MX22) Multiplex transmitter:   (Royal Evo, Cockpit SX, mc4000) JR and other transmitters without programmable channel:   (9303, 9X)

    Tested with AEO E-Power 15A ESC * 2 No Load Data: 7V : 1.7 8V : 1.8 10V : 2.0 Weight: 58g Max Power: n/a Dimension: 23*54 Length of shaft: 13(mm) Diameter of shaft: 3.0 (mm) Tested with 7035*3 GWS*2 Propellers Product KV w/Motor Volts Amps Watts RPM Pitch Speed (m/s) Thrust(g) Thrust(oz) Efficiency(g/W) Efficiency(oz/W) CR23M 1550 CR23M 7.4 10.5 77.7     375 13.23 4.83 0.17       8 11.6 92.8     415 14.64 4.47 0.16       8.4 12.3 103.32     460 16.23 4.45 0.16       10 15.6 156.0     595 20.99 3.81 0.13       11.1 18.0 199.8     695 24.51 3.48 0.12       12.6 21.4 269.64     800 28.22 2.97 0.10

Introduction: With 6 months development, improvement and test, the new battery voltage logger and health analyzer has been released to the market. The R1 is not only an accurate 6S battery voltage cell meter, but also integrated with battery health analysis function. So it?s really a necessity to the model pilots.   Specification：   Working temperature： -20 ℃-50 ℃   Weight： 10g Size：53x 29x 5mm   Feature： 1. Small, light and ultra-portable with only 5mm thickness, including LCD screen.   2. Voltage value and capacity display. Up to 6 cells voltage display of single cell and total pack  +/- 0.01V(10mv) display resolution and +/-2％ accuracy. 3. Battery analysis function. Score your battery if the cells balance well or not. Direct indicate of cell capacity and total pack capacity. 4. In-flight battery discharge curve logger. 5. Record the lowest voltage of the battery during the flight 6. Voltage measurement trimming. 7. Reverse connection protection. Remarks and attentions： -Due to the battery pack loading drop, to avoid the voltage measurement difference error, make sure the battery pack is disconnected at least 30 seconds.  -Data display refresh rate may drop in low temperature environment. This is normal because of the LCD panel characteristics.   -Although the R1 is a device with very low power consumption, make sure disconnect the battery after its use.  -There are ?A? and ?B? button on the product.  -The R1 is for LiFePO4 and lithium polymer battery only.

Motor Specs Weight: 4.6g Max Power: 3A or 30W Dimension: 13.9 x 17mm Length of shaft: 5mm Diameter of shaft: 1.5mm No Load Data (Tested with AEO E-Power 5A ESC) 7V: 0.18A 8V: 0.21A 10V: 0.27A

With the micro C10 brushless outrunner motor, you can convert your Esky Lama V3/V4/KOB/Hunter and similar model to brushless! Features: KV:2900kv,2100kv(can be made the kv reaches about 7700kv now) Weight:7.9g Winding Material:copper / silver-plating line Size: 17.8mm X 15mm Shaft Diameter: 2mm No load Current:10V 0.5A(2900kv) 10V 0.4A(2100kv) Max Continous Current:2.9A(2900kv) 2.5A(2100kv) Surge Current:3.5A(2900kv) 2.9A(2100kv) Max Power:25W 23W Recommended Prop.:4*2.5 / 5*3 Tested with GWS 4×2.5 Propeller Tested with AEO E-Power 5A ESC 7V: 0.33A @ 20032 RPM 8V: 0.37A @ 22912 RPM 10V: 0.43A @ 28754 RPM Volts Amps Watts RPM Pitch Speed (m/s) Thrust(g) Thrust(oz) Efficiency(g/W) Efficiency(oz/W) 7 2.6 18.13 13250 14.02 97 3.42 5.35 0.19 7.5 2.8 20.78 14200 15.03 106 3.74 5.10 0.18 8 3.0 23.92 14850 15.72 117 4.13 4.89 0.17 9 3.3 27.63 15600 16.51 128 4.51 4.63 0.16 Tested with GWS 5×3 Propeller Volts Amps Watts RPM Pitch Speed (m/s) Thrust(g) Thrust(oz) Efficiency(g/W) Efficiency(oz/W) 7 3.5 24.50 11200 14.22 140 4.94 5.71 0.20 7.5 3.6 27.30 11500 14.61 151 5.33 5.53 0.20