Chargers/Balancer

Solar charger for mobile phone, digital cameras, PDA, MP3, MP4, Portable DVD,  Laptop, etc With this solar charger, you can charge most of cell phones, digital cameras,MP3,MP4 etc. Based on the lithium polymer battery’s advantages of longer rechargeable life, light  weight, more safety, superior compatibility and high capacity,  this solar energy charger will be the best product for business trip, outdoor operations, and gift for relatives or friends. Material: ABS+PC Size: 250*100*35 mm Weight: 1000g,     Net Weight: 650g Build-in Battery Type: Li-Polymer Capacity: 3.7V/12000mAh, 11.1V/4000mAh   Li-Polyer battery power: 44.4W Power of Solar panel: 4.5 W   Output Voltage: 7 output sockets Big USB (5.0V) ; Small USB (5.0V) 5.4V 9.0V 11.1V 16V 19V   Output Current: Big USB (5.0V) 500mA; Small USB (5.0V) 500mA ,  5.4V 500 mA ,  9.0V 1500 mA  , 11.1V 4000 mA ,  16V  3000 mA,  19V 2500 mA Input:   DC 12.6V 1500 mAh Required charging time: about 4.5 hours If charged by solar energy: Above 14 hours with product put under properly sunlight. Functions and feature 1.        Elaborate and fashion 2.        Small size, light and easy carrying. 3.        Can be used for various digital products from the different output ports 4.        With special protection for over current, short circuit, over charge, over discharge. 5.        With CE and ROHS approval. Functions for each connector Output as follows: Small USB charging with the 5V needed, as mobile phone, MP3, MP4, PDA etc Big USB charging with the 5V needed, as mobile phone, MP3, MP4, PDA etc DC 5.4V : Charging the mobile phone and digital camera mainly DC 9V : Charging the mobile DVD mainly DC 11.1V: Charging the laptop and the relative products with 12V needed mainly DC 16V: Charging the laptop and the relative products with 16V needed mainly DC 19V: Charging the laptop and the relative products with 19V needed mainly Notes: Make sure to select only one output port for use at a time. Do not open the product case without authorization. Keep the product away from rain or water. Keep the product away from fire/stove/oven. If intended not to use the device in a long period (like half year), please first discharge, then recharge, and then store.

This product is a multi-function digital mobile solar power supply. The high-efficiency set-up IC, and the intelligent automatic voltage regulation technology which can monitor the discharge voltage and current, give this product a strong security protection.  With the small and exquisite and novel casing, the built-in large-capacity rechargeable lithium polymer batteries are applied in a wide scale, durable and cost-effective. So you can use it to charge your digital products, such as mobile phones, digital cameras, PDA, PSP, MP3, MP4, IPOD, DV, etc, at all times and all places. Solar panel power: 5.5V*360MA =1.98W Solar charging current: 250mAh The built-in battery: 3.7V,3000mAh high-rate and high-capacity lithium polymer battery.  Recharged by solar, AC power and USB Input voltage/current: 5V/1000mAh–1300mAh Output voltage/current: 5.5V*1000mA / 8.4V*1300mA / 12V*800mA The charging time (AC adapter): 2-3 hours Applicable for: cell phone, Digital Cameras, PDA, PSP,  MP3, MP4, iPOD, DV, etc. Product Size:140*88*24mm Weight: 218g

With the release for iPhone 3G and iPhone 3G S, which with iPhone OS 3.0 we’ll be gifted with MMS, Copy and Paste, Tethering, Stereo Bluetooth, and a bunch of lovely new features. It is energy-consuming even though its built-in battery?s standby time up to hundreds hours and 5 hours on talk. "I love my iPhone 3G! It is the best personal gadget I’ve ever owned. However, my battery begins to run out, towards the end of the day. And you can run out of juice if you are traveling, or in an airport.? Now we’re introducing our newest backup battery, using Apple’s proprietary connector: the rechargeable iPhone external backup battery charger iPa, which have more advantages compared with the built-in previous one, longer standby time with higher capacity, impressive appearance, easy-operate etc.  The iPa 3000 is a MUST-HAVE travel kit which features the highest battery capacity in the market( 3000mAh 5.5V) which allow you to watch 10+ movies during flight on your iPhone 3G/3Gs, talk for 8+ hours, play 2 days of music, or gain an additional 10+ hours of surfing the internet! Like every iPhones, iPa its black to give it a serious, businesslike exterior. Its glossy finish gives it an edgier, more personalized look. High quality cutis cover, streamline outlook design, with elegant appearance. You can charge it at the wall, in your car, from your computer, and you can charge them both at the same time. Connect the iPa to the iPhone, then connect the iPa to the charger, and charge both with one charger. In fact, if you do not consider the appearance of iPhone, both together will be considered as one part as above. Yes, the point is its just for your iPhone only. Of course, the backup battery is not just a part of the devices, and iPa has made most of its significant breakthrough inside the iPa.   iPa 3000 Highlights 1. High capacity in the market( 3000mAh 5.5V), allow you to watch 10+ movies on air plane with this 3G iPhone and iPod touch external backup battery and you will not need to worry about 3G iPhone battery life any more! 2. Portability, it is small, much less than the palm size, which can be put into pocket to carry around, light-weight, super-slim design to carry with your iPhone conveniently charged via iPhone original charger. 3. Ability to use iPhone while recharging. 4. One full iPhone recharge with each full battery in case. 5. Secure fastening for keeping iPhone in place. 6. Three color LED lights to show you the status of the charge. 7. Small, light, easy to carry around.  The perfect travel kit! 8. Quality certificate: FCC, CE, RoHS and UL. The iPa 3000 portable charger features: Standby time: up to 500 hours Talk time: Up to 8.5 hours 3G/3G S Internet use: Up to 8.5 hours on 3G Up to 10 hours on Wi-Fi Audio play: Up to 40 hours Video play: Up to 11 hours Specifications: Model No.: iPa 3000mAh external back up battery Apply: iPhone 3G 16GB, 8GB; iPhone 3GS 16GB, 32GB Capacity: 3000mAh Output voltage: DC 5.5V Output current

Operating voltage: DC 10~18 volts 50/60Hz Charge/discharge power: Max. 80/10 Watts NiCd/MH: 1~15 cells LiIo/LiPo/LiFe: 1~6 series Pb: 2~20V Charge current: 0.1 to 6.0A Discharge current: 0.1 to 2.0A No. Of cycle: 1 to 5 times Battery data memory: Up to 5 data Individual voltage balancer for Lithium batteries inside Built into the smart charger is an individual-cell-voltage balancer. No external balancer is needed when charging Lithium batteries (LiIo/LiPo/LiFe) for balance charging. Balance individual cells on discharge The smart charger also can monitor and balance individual cells of the Lithium battery pack during the discharge process, as well as the charge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message. Accept various types of Lithium battery The smart charger can accept three types of Lithium batteries – LiIo, LiPo and LiFe. They have different characteristics by their chemistry, such as minimum, maximum, and charge termination voltages. Lithium battery Fast and Storage mode The smart charger offers additional Lithium programming. Fast charge reduces the charging time of the Lithium battery and the Storage mode controls the final voltage of the battery to be suit for long time storage. Data store/load 5 data of different batteries programs can be stored and retrieved. These data files can be recetrived at any time you need them without reprogramming. Cyclic charging/discharging The smart charger can perform 1 to 5 cycles of charge>discharge or discharge>charge for battery break in/refreshing and balancing. PC based analysis using USB communication For the advanced user, the smart charger INCLUDES a PC based program that can analyze the characteristic of the battery through the computers USB port. The software will graph voltage, current, capacity and temperature curves. It also shows the individual voltages of each cell in the Lithium battery pack. Back-light LCD screen Include LCD display Robust outer aluminum case High-quality aluminum case is durable and very efficient to cool out the internal heat Advanced temperature sensor cable port (sensor cable not included) An optional temperature probe contacting the surface of the battery to monitor the battery temperature during charging can be used