ESC Speed Controllers

#93A16-13 Specification 50A 3-4 Lipo’s Lenght:72mm Width:31mm Height:12.5mm Weight:72g Banana 4.0 Connector 3mm Bullet Connectors

Features / Specifications: 1. These types of speed controllers especially designed to offer high power and high efficiency combined with low weight and compact dimensions. 2. Automatic cut off and auto detection of all types and number of cells. 3. Perfect design for direct drive applications. The motor will respond to throttle input & accelerate instantly. There is no immediate cut-off power when the voltage drops, instead, the power to the motor will be gradually reduced as the battery loses its charge, providing enough time to safely drive termination or stop the model. When the battery voltage drops below 65% of its full charge capacity, the power to the model will be cut-off.. 4. Driving forwards the braking will be actuated by reversing throttle direction while driving forwards. Interval or spot braking can always be controlled perfectly while driving forwards except when the driving speed drops to certain low level or slip driving happens, which will then reverse to drive backwards after reversing the throttle direction. 5. Driving backwards the braking will be actuated by reversing throttle direction while driving backwards. By reversing throttle direction during driving backwards, it will get only a brief braking action & then reverse to drive forwards instantly. The speed of driving backwards will be responded proportionally to the throttle input. 6. Over temperature protection – Motor to be intermittently turned off when the temperature reaches around 105¢X centigrade. 7. Fail safe mode – once there is any abnormal signal or signal fail between transmitter & receiver, being detected for about 2 seconds, the controller will cut off the motor power automatically. Once the signals get back to normal, the system will auto-turn on again. 8. Specifications 8.1 Input voltage : 6V ~ 16.8V DC 8.2 Output : 25A, Peak 30A 10 Sec 8.3 BEC : 5V 2A 8.4 Weight : 31g 8.5 Dimension : 41 x 25 x 10 mm

#PF-425-SP-035 30A ESC 2-3 cell Lipo Weight: 25g Lenght x Width x Height: 50.5mm x 25mm x 9mm

      Model Platinum-40A-PRO Manual User Manual Preview Platinum-40A-PRO ESC belongs to Hobbywing?s "Platinum" series products line, it is the most significant top-class product for aircraft and helicopter.   1  Typical Applications 1.1 Super powerful  for 450 and 400 class helicopter   1.2  Very powerful for middle scale aircraft 2  Specification   2.1 Output:  Continuous 40A, burst 60A up to 10 seconds. 2.2  Input Voltage:   2-6 cells lithium battery or 5-18 cells NIMH battery.    2.3  BEC:    Switching mode DC-DC regulator.  3A@5.25V or 3A@6V switch able by user progromming. 2.4 Control Signal Transmission:  Optically coupled system. 2.5 Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.                                (BLM: Brushless Motor) 2.6  Size:   59mm (L) * 27mm (W) * 12mm (H). 2.7 Weight:   38g.  3  Features   3.1 High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency. 3.2 Wide-open heat-sink design to get the best heat dissipation effect. 3.3 With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter.  3.4 Smooth, linear, quick and precise throttle response. 3.5 The output voltage of the built-in BEC is switch able by user programming (5.25V or 6.0V). 3.6 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection 3.7 Perfect governor mode for helicopter.   3.8 The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box. 3.9 User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field.  

    Model Platinum-150A-PRO Manual User Manual Preview Platinum-150A-PRO ESC belongs to Hobbywing’s “Platinum” series products line, it is the most significant top-class product for aircraft and helicopter. 1 Typical Applications 1.1 Very powerful for 600 class helicopter (Working with 6 cells Lipo battery) 1.2  Very powerful for 700 class helicopter (Working with 6 cells Lipo battery) 1.3 Very powerful for huge scale aircraft such as F3A (Working with 6 cells lipo battery) 2 Specification 2.1 Output: Continuous 150A, burst 220A up to 10 seconds. 2.2 Input Voltage: 2-6 cells lithium battery or 15-18 cells NIMH battery. 2.3 BEC: None. 2.4 Control Signal Transmission: Optically coupled system. 2.5 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor) 2.6 Size: 88mm (L) * 55mm (W) * 16mm (H). 2.7 Weight: 125g. 3 Features 3.1 High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency. 3.2 Wide-open heat-sink design to get the best heat dissipation effect. 3.3 With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 3.4 Smooth, linear, quick and precise throttle response. 3.5 The throttle signal is transfered through optically coupled system to avoid the electromagnetic interference. 3.6 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection. 3.7 Perfect governor mode for helicopter. 3.8 The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box. 3.9 User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field.

GUEC GE-122 ESC 12A with Connectors (For Brushless Motor)